Every casestarts as a line.
We draw it, extrude it in aluminium and build it around what you carry. Tool cases, instrument cases and watch cases, made in Ahmedabad.
Drawn once, extruded by the metre.
The line is the cross-section of a frame profile. Pushed through a die it becomes a bar of aluminium, cut to the length your case needs.
Front tongue profile
Cut, cornered, squared.
Tongue profiles on the base, groove profiles on the lid, so the two halves close into each other. Corner pieces take the knocks.
Panels in, hardware on.
MDF, ACP or clear acrylic panels sit in the frame. Hinges, latches and the handle are riveted through.
Foam cut to your outlines.
Send a DXF or draw the pockets yourself. We machine the foam to the depth each item needs, so nothing moves on the road.
Three ways to build it.
Rounded corners and a slim frame. Our lightest build, and the one the watch cases use.
Built around what goes inside.
Four cases we have shaped for four very different loads. Scroll through them slowly, or drag any case to turn it.
A survey drone, ready in two minutes
Drone, controller and three batteries, each in a pocket of its own. Square Finish, key latches, handles on both sides.
520 × 380 mm inside · 140 base + 50 lid
A weight set that stays calibrated
Weights from 1 kg down to 10 g, a pipette and four vials. Nothing touches anything else.
Rounded Finish with silver panels. The foam is one block, machined to a different depth for every weight.
400 × 300 mm inside · 100 base + 50 lid
Instruments in the order they are used
Ten instruments in two rows, the foam cut to each outline so a missing one shows at a glance.
White panels that wipe clean, light foam so steel stands out against it.
450 × 320 mm inside · 90 base + 40 lid
A product demo that arrives working
Camera, tablet and spare power. A mains inlet in the wall and stays that hold the lid open on the stand.
Tell us what you carry and we will draw the foam for it, or draw it yourself in the studio.
Fifteen watches, under glass.
The Lucid lid is clear acrylic, so a collection shows even when the case is locked. Every pillow sits in its own machined pocket.
Opened, it is a display.
Machined EVA in the fifteen, velvet-wrapped walls in the twenty-four. The handle sits on the front, and the hinges stop the lid just past upright.
Our best-known cases.
Three frame finishes, a solid or a clear lid, for fifteen or twenty-four watches.
Ready-made cases.
The cases we build again and again. Order one as it is, or open it in the studio and make it yours.
Design it yourself. See the price as you go.
- Set the inside size to the millimetre and watch the case redraw.
- Choose the build, the panels, the colours and the hardware.
- Draw the foam pockets, or import a DXF and set each depth.
- See the price for 5 to 20 cases and send the request. We confirm by WhatsApp or e-mail.
Made-to-order cases start at 5 pieces. For more than 20 we quote by hand.
How an order runs.
Tell us what goes inside
A list, a photo, a drawing or the thing itself. Or design the case in the studio.
We draw the case and the foam
You get the drawing with the size, the build and the price.
You approve
Change what you like. Nothing is cut until you say so.
We build, check and ship
The batch is built, every case is checked, and it ships from Ahmedabad.